dmesg - Intel Xeon E3-1231 v3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cb991000 (usable)
BIOS-e820: 00000000cb991000 - 00000000cb998000 (ACPI NVS)
BIOS-e820: 00000000cb998000 - 00000000dcfad000 (usable)
BIOS-e820: 00000000dcfad000 - 00000000dd059000 (reserved)
BIOS-e820: 00000000dd059000 - 00000000dd074000 (ACPI data)
BIOS-e820: 00000000dd074000 - 00000000dd822000 (ACPI NVS)
BIOS-e820: 00000000dd822000 - 00000000defff000 (reserved)
BIOS-e820: 00000000defff000 - 00000000df000000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000820000000 (usable)
SMBIOS version 2.8 @ 0xF04D0
SMBIOS 2.8 present.
DMI: FUJITSU PRIMERGY RX1330 M1/D3229-A1, BIOS V4.6.5.4 R2.14.0 for D3229-A1x 04/16/2015
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x820000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
total RAM covered: 32768M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32G num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 32GB, range: 512MB, type WB
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000df000000
0000000000 - 00c0000000 page 1G
00c0000000 - 00df000000 page 2M
kernel direct mapping tables up to df000000 @ 10000-12000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000820000000
0100000000 - 0800000000 page 1G
0800000000 - 0820000000 page 2M
kernel direct mapping tables up to 820000000 @ 11000-13000
RAMDISK: 366d2000 - 37fef662
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f04a0 00024 (v02 FTS )
ACPI: XSDT 00000000dd05f098 000AC (v01 FTS A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd06e078 0010C (v05 FTS A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd05f1d0 0EEA8 (v02 FTS A M I 00000214 INTL 20091112)
ACPI: FACS 00000000dd821f80 00040
ACPI: APIC 00000000dd06e188 00092 (v03 FTS A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd06e220 00044 (v01 FTS A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000dd06e268 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000dd06e7a8 00AEC (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 00000000dd06f298 0003C (v01 FTS A M I 01072009 MSFT 00000097)
ACPI: PRAD 00000000dd06f2d8 000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: HPET 00000000dd06f398 00038 (v01 FTS A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd06f3d0 0036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000dd06f740 03474 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BDAT 00000000dd072bb8 00030 (v01 INTEL HSW-LPT 00001000 INTL 20090903)
ACPI: SPMI 00000000dd072be8 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: DMAR 00000000dd072c28 00080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: EINJ 00000000dd072ca8 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 00000000dd072dd8 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 00000000dd073008 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 00000000dd0730b0 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000820000000
Bootmem setup node 0 0000000000000000-0000000820000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000100000 - 0000000000203fff] pages 104
(8 early reservations) ==> bootmem [0000000000 - 0820000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002045964] TEXT DATA BSS ==> [0001000000 - 0002045964]
#3 [00366d2000 - 0037fef662] RAMDISK ==> [00366d2000 - 0037fef662]
#4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#5 [0002046000 - 000204655b] BRK ==> [0002046000 - 000204655b]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000012000] PGTABLE ==> [0000011000 - 0000012000]
found SMP MP-table at [ffff8800000fd830] fd830
Found 131MB of memory at 48MB for crashkernel auto
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33280MB)
[ffffea0000000000-ffffea000e5fffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
[ffffea000e600000-ffffea001c7fffff] PMD -> [ffff880038000000-ffff8800461fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00820000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000cb991
0: 0x000cb998 -> 0x000dcfad
0: 0x000defff -> 0x000df000
0: 0x00100000 -> 0x00820000
On node 0 totalpages: 8376116
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3822 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 886751 pages, LIFO batch:31
Normal zone: 102144 pages used for memmap
Normal zone: 7368960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cb991000 - 00000000cb998000
PM: Registered nosave memory: 00000000dcfad000 - 00000000dd059000
PM: Registered nosave memory: 00000000dd059000 - 00000000dd074000
PM: Registered nosave memory: 00000000dd074000 - 00000000dd822000
PM: Registered nosave memory: 00000000dd822000 - 00000000defff000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df000000 (gap: df000000:19000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u262144
pcpu-alloc: s96600 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8259533
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 32799572k/34078720k available (5467k kernel code, 574256k absent, 704892k reserved, 6954k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
Detected 3392.025 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.05 BogoMIPS (lpj=3392025)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21966 entries in 87 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000dee45000 end: 0x000000dee54fff
dmar: No ATSR found
IOAPIC id 8 under DRHD base 0xfed90000
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
APIC routing finalized to cluster x2apic.
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz stepping 03
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54272.40 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at cb991000 (28672 bytes)
PM: Registering ACPI NVS region at dd074000 (8052736 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
PMU erratum BJ122, BV98, HSD29 worked around, HT is on
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7c14000-0xf7c143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7c13000-0xf7c133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7c12000-0xf7c127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7c11000-0xf7c110ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: reg 10: [mem 0xf7c10000-0xf7c10fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 14: [mem 0xf7b60000-0xf7b63fff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xf7b00000-0xf7b3ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xf7b40000-0xf7b5ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6ffffff pref]
pci 0000:03:00.0: reg 14: [mem 0xf7830000-0xf7833fff]
pci 0000:03:00.0: reg 18: [mem 0xf7000000-0xf77fffff]
pci 0000:03:00.0: reg 30: [mem 0xf7820000-0xf782ffff pref]
pci 0000:03:00.1: reg 10: [mem 0xf7800000-0xf781ffff]
pci 0000:03:00.1: reg 14: [mem 0xf7834000-0xf78340ff]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf78fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf6ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf7a00000-0xf7a7ffff]
pci 0000:04:00.0: reg 18: [io 0xd000-0xd01f]
pci 0000:04:00.0: reg 1c: [mem 0xf7a80000-0xf7a83fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:05:00.0: reg 10: [mem 0xf7900000-0xf797ffff]
pci 0000:05:00.0: reg 18: [io 0xc000-0xc01f]
pci 0000:05:00.0: reg 1c: [mem 0xf7980000-0xf7983fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
hpet: hpet6 irq 29 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0061]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0680-0x069f]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0x1c00-0x1cfe]
pnp 00:06: [io 0x1d00-0x1dfe]
pnp 00:06: [io 0x1e00-0x1efe]
pnp 00:06: [io 0x1f00-0x1ffe]
pnp 00:06: [io 0x1800-0x18fe]
pnp 00:06: [io 0x164e-0x164f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x1854-0x1857]
pnp 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0044-0x005f]
pnp 00:0a: [io 0x0062-0x0063]
pnp 00:0a: [io 0x0065-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0ca2]
pnp 00:0b: [io 0x0ca3]
pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0c: [mem 0xf7c17000-0xf7c1700f]
pnp 00:0c: [mem 0xf7c16000-0xf7c1600f]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: [mem 0xfed10000-0xfed17fff]
pnp 00:0d: [mem 0xfed18000-0xfed18fff]
pnp 00:0d: [mem 0xfed19000-0xfed19fff]
pnp 00:0d: [mem 0xf8000000-0xfbffffff]
pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
pnp 00:0d: [mem 0xfed90000-0xfed93fff]
pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
pnp 00:0d: [mem 0xfee00000-0xfeefffff]
pnp 00:0d: [mem 0xf7fdf000-0xf7fdffff]
pnp 00:0d: [mem 0xf7fe0000-0xf7feffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x1c00-0x1cfe] has been reserved
system 00:06: [io 0x1d00-0x1dfe] has been reserved
system 00:06: [io 0x1e00-0x1efe] has been reserved
system 00:06: [io 0x1f00-0x1ffe] has been reserved
system 00:06: [io 0x1800-0x18fe] has been reserved
system 00:06: [io 0x164e-0x164f] has been reserved
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [mem 0xf7c17000-0xf7c1700f] has been reserved
system 00:0c: [mem 0xf7c16000-0xf7c1600f] has been reserved
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0d: [mem 0xf7fe0000-0xf7feffff] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf78fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf78fffff]
pci_bus 0000:03: resource 2 [mem 0xf6000000-0xf6ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf7900000-0xf79fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: power state changed by ACPI to D0
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:03:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25717k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1503648534.432:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1A01485A64DD991D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.1: irq 31 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [PSD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000dd04cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dd04c618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000dd04bd98 00119 (v01 PmRef ApCst 00003000 INTL 20120711)
[Firmware Bug]: No valid trip found
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c14000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c13000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2017-08-25 08:08:55 UTC (1503648535)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
megasas: 07.700.00.00-rc1
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
megaraid_sas 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
megaraid_sas 0000:02:00.0: setting latency timer to 64
megaraid_sas 0000:02:00.0: FW now in Ready state
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
megaraid_sas 0000:02:00.0: irq 32 for MSI/MSI-X
megaraid_sas 0000:02:00.0: firmware supports msix : (0)
megaraid_sas 0000:02:00.0: current msix/online cpus : (1/8)
megaraid_sas 0000:02:00.0: RDPQ mode : (disabled)
usb 1-1: new high speed USB device number 2 using ehci_hcd
megaraid_sas 0000:02:00.0: controller type : MR(512MB)
megaraid_sas 0000:02:00.0: Online Controller Reset(OCR) : Enabled
megaraid_sas 0000:02:00.0: Secure JBOD support : No
megaraid_sas 0000:02:00.0: megasas_init_mfi: fw_support_ieee=0
megaraid_sas 0000:02:00.0: INIT adapter done
megaraid_sas 0000:02:00.0: Jbod map is not supported megasas_setup_jbod_map 5034
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
megaraid_sas 0000:02:00.0: pci id : (0x1000)/(0x0079)/(0x1734)/(0x1176)
megaraid_sas 0000:02:00.0: unevenspan support : no
megaraid_sas 0000:02:00.0: firmware crash dump : no
megaraid_sas 0000:02:00.0: jbod sync map : no
scsi0 : Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access LSI RAID 5/6 SAS 6G 2.13 PQ: 0 ANSI: 5
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:00:14.0: irq 33 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-696.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-696.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c12000 port 0xf7c12100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xf7c12000 port 0xf7c12180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xf7c12000 port 0xf7c12200 irq 34
ata4: SATA max UDMA/133 abar m2048@0xf7c12000 port 0xf7c12280 irq 34
ata5: DUMMY
ata6: DUMMY
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Refined TSC clocksource calibration: 3392.160 MHz.
Switching to clocksource tsc
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-1: new high speed USB device number 2 using xhci_hcd
sd 0:2:0:0: [sda] 936640512 512-byte logical blocks: (479 GB/446 GiB)
sd 0:2:0:0: [sda] 4096-byte physical blocks
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:2:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=0e8d, idProduct=1887
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Portable Super Multi Drive
usb 3-1: Manufacturer: Hitachi-LG Data Storage Inc
usb 3-1: SerialNumber: KV5E34B5127
usb 3-1: configuration #1 chosen from 1 choice
usb 3-3: new full speed USB device number 3 using xhci_hcd
usb 3-3: New USB device found, idVendor=046b, idProduct=ff10
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Virtual Keyboard and Mouse
usb 3-3: Manufacturer: American Megatrends Inc.
usb 3-3: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input3
generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-3/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input4
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-3/input1
usb 3-9: new low speed USB device number 4 using xhci_hcd
usb 3-9: New USB device found, idVendor=045e, idProduct=00cb
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Microsoft Basic Optical Mouse v2.0
usb 3-9: Manufacturer: Microsoft
usb 3-9: configuration #1 chosen from 1 choice
usb 3-9: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input5
generic-usb 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-9/input0
usb 3-10: new low speed USB device number 5 using xhci_hcd
usb 3-10: New USB device found, idVendor=413c, idProduct=2003
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: Dell USB Keyboard
usb 3-10: Manufacturer: Dell
usb 3-10: configuration #1 chosen from 1 choice
usb 3-10: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input6
generic-usb 0003:413C:2003.0004: input,hidraw3: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-10/input0
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
type=1404 audit(1503648537.554:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
SELinux: 81 classes, 309305 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1503648537.960:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GP50NB40 1.00 PQ: 0 ANSI: 0
udev: starting version 147
sd 0:2:0:0: Attached scsi generic sg0 type 0
scsi 7:0:0:0: Attached scsi generic sg1 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
igb 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 39 for MSI/MSI-X
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:1b:0e:52:f5:41
igb 0000:04:00.0: eth0: PBA No: 313230-034
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
igb 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 44 for MSI/MSI-X
pps pps1: new PPS source ptp1
igb 0000:05:00.0: added PHC on eth1
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 90:1b:0e:53:85:f9
igb 0000:05:00.0: eth1: PBA No: 313130-034
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0b: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0b: Found new BMC (man_id: 0x002880, prod_id: 0x0411, dev_id: 0x04)
ipmi_si 00:0b: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1c
platform microcode: firmware: requesting intel-ucode/06-3c-03
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x20, date = 2016-03-16
microcode: CPU1 updated to revision 0x20, date = 2016-03-16
microcode: CPU2 updated to revision 0x20, date = 2016-03-16
microcode: CPU3 updated to revision 0x20, date = 2016-03-16
microcode: CPU4 updated to revision 0x20, date = 2016-03-16
microcode: CPU5 updated to revision 0x20, date = 2016-03-16
microcode: CPU6 updated to revision 0x20, date = 2016-03-16
microcode: CPU7 updated to revision 0x20, date = 2016-03-16
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda7, type ext4), uses xattr
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda6, type ext4), uses xattr
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda5, type ext4), uses xattr
Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1503648540.759:4): audit_pid=1766 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:04:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:04:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:04:00.0: eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present